Go To The Previous Page


MMA’S

Fast-cure resins for quick turnaround and minimal down time


MMA’s are fast-cure resins, making them an ideal choice for busy commercial areas to keep disruption as minimal as possible

The surface can be installed quickly and is typically trafficable within 2 hours of layingSmooth and textured finished can be created, and also bespoke designs or corporate branding incorporated into the surface

A highly decorative surface can be created with the incorporation of flakes, glitters or quartz’s, and so is well suited to a wide variety of commercial environments to create a distinctive surface

MMA 1 MMA 2 MMA 3 MMA 4






APPLICATIONS

  • Commercial kitchens
  • Entertainment venues
  • Supermarkets
  • Schools
  • Retail settings
  • Airports





PRODUCTS FEATURES AND BENEFITS

Quick installation. Most systems require primer coats, bodycoat and sealer coats. Each coat can be applied within one hour, this saves a lot of downtime between coats, if compared to epoxies and polyurethanes which normally require 4-8 hours to cure sufficiently to apply the next layer.

Cure times. Both physical and chemical curing takes time with standard epoxies and polyurethane’s with physical curing from anywhere between 4-48hours and chemical curing which can be to 7 days. Both the physical and chemical curing of MMA takes just two hours.

Installation at cold temperatures. Standard epoxies and polyurethane’s should not be laid below 5 deg C, and ideally laid at room temperature, as temperature has a big effect on the curing of these systems, too hot they will cure very quickly but too cold and the product may not cure. The beauty of MMA is the resin can be applied down to -30 deg C with no affect on the speed of cure.

Chemcial bonding. MMA resins achieve a chemical bond between each installation layer, resulting in a monolithic finish. Each application chemically fuses to the previous layer. Epoxy and polyurethane resins achieve only a mechanical bond between installation layers.

Tailored to your needs. Flakes, quartz aggregates or glitters can be combined to make a highly decorative/ anti-slip finish.




INSTALLATION METHOD

PREPARATION – The floor is typically prepared by diamond grinding or scabbling.

INSTALLATION – Depending upon the type of MMA product installed the product is hand mixed and applied using either trowel, wire rake and spike roller with the desired flake or quartz.





EXAMPLE COLOURS

Wide range of Standard and Custom colours available, a few examples as follows;


MMA 1 MMA 2 MMA 3 MMA 4 MMA 5
Click image to enlarge
MMA 1
MMA 2
MMA 3
MMA 4
MMA 5




What next?

If you require any other assistance we are happy to answer any questions. Please call us on 01745 887381 or request a call back.

Case Studies